Home » Products » AC Automatic Voltage Regulator (AVR) & Transformer » Wall-Mounted Single Phase Servo Voltage Stabilizer
inquiry form

Wall-Mounted Single Phase Servo Voltage Stabilizer

Our wall-mounted single phase servo voltage stabilizer is divided into two series, which are TSD and HSD.

Type 1: TSD Wall-Mounted Single Phase Servo Voltage Stabilizer
The TSD series is upgraded from SVC single/three phase servo voltage stabilizer. Compared with SVC series, this product shows better quality, improved function as well as more stylish appearance, and the wall-mounted design saves a lot of space. The control system is built up by large-scale linear circuit and logic circuit, and it is used to make the servo motor drive contact type autotransformer.

This product successfully puts the industrial level high precision servo type voltage stabilization technique into applications for civil use, and it overcomes transient power failure which is inevitable for conventional relay type product, thus realizing precise, uninterruptible and stable power supply.

With the help of our TSD series single phase servo voltage stabilizer, the high end electrical appliances could work safely and normally independent of the condition of mains supply, extending their service life.

Technical Parameters
Input voltage Single phase: 160V-250V Ambient temperature -10℃~+40℃
Output voltage Single phase: 220V, 110V Relative humidity <95%
Voltage stabilization accuracy 220V±3%, 110±6% Temperature rise <60℃
Frequency 50Hz/60Hz Waveform distortion No additional distortion
Adjust time < 1 second (when input voltage changes by 10%) Load power factor 0.8
Efficiency > 90% Dielectric strength 1500V/min
Overvoltage protection 246±4V Insulation resistance >5MΩ
Under voltage protection 184±4V Long/short delay time 5±2 minutes / 5±2 seconds
Specifications
Model (KVA) Product size (D×W×H, mm) Packing size (D×W×H, mm) Weight (kg) Load quantity per carton (pcs)
TSD-3.0 370×250×130 420×320×180 11 1
TSD-4.0 370×250×130 420×320×180 12 1
TSD-5.0 430×300×140 490×360×190 25 1
TSD-6.0 430×300×140 490×360×190 26 1
TSD-7.0 430×300×140 490×360×210 27 1
TSD-8.0 480×320×190 520×380×250 29 1
TSD-10 480×320×190 520×380×250 32 1

Type 2: HSD Wall-Mounted Single Phase Servo Voltage Stabilizer
The HSD series is a new generation wall-mounted product that is developed on the basis of traditional ones. The digital display technique allows automatic display of delay time, output voltage, mains supply voltage, protection status and other parameters, while direct mains supply access is also available. In addition, the HSD single phase servo voltage stabilizer has an elegant appearance, offering excellent decorative effect for the working site.

Technical Parameters
Input voltage Single phase: 160V-250V
Output voltage Single phase: 220V, 110V
Overvoltage protection 246±4V
Under voltage protection 184±4V
Frequency 50Hz/60Hz
Adjust time <1 second (when input voltage changes by 10%)
Efficiency >90%
Long/short delay time 5±2 minutes / 5±2 seconds
Ambient temperature -10℃~+40℃
Relative humidity <95%
Waveform distortion No additional distortion
Dielectric strength 1500V/min
Insulation resistance >5MΩ
Specifications
Model (KVA) Product size (D×W×H, mm) Packing size (D×W×H, mm) Weight (kg) Load quantity per carton (pcs)
HSD-5 480×260×170 590×350×250 24 1
HSD-7 480×260×170 590×350×250 27 1
HSD-8 540×290×180 620×380×260 29 1
HSD-10 540×290×180 620×380×260 32 1

Related Names
Fixed Voltage Regulator Maker | Automatic Voltage Regulation | Home Electric Tool

Inquiry Form